Immersion Temperature Transmitters TITB and TISB

Immersion Temperature Transmitters TITB and TITS

The immersion temperature transmitters TITB/TITS are used for acquiring the temperature of liquid or gaseous media (e.g. heating water) in heating, ventilation and air conditioning systems.

The TITB/TITS are active immersion temperature transmitters with 0-10 Vdc or 4-20 mA output.

8 different temperature ranges in same unit,
selectable via jumpers on pcb:

-20C to +150C, -50C to +50C, -20 to +80C, -30C to +60C,
0 to +40C, 0 to +50C, 0 to +100C and 0 to +150C.

With or without LCD display

The probe of immersion temperature transmitters TITB/TITS is made of quality steel, available in 6 different lenghts 50, 100, 150, 200, 250 and 300 mm.

The immersion temperature transmitters TITB-versions are supplied with brass pocket for operation pressures up to 16 bar.

The immersion temperature transmitters TITS-versions are supplied with stainless steel pocket for operation pressures up to 40 bar.

The pockets of the immersion temperature transmitters TITB/TITS have
G1/2” threaded connector.

The sensing element of the immersion temperature transmitters TITB/TITS is located in the end of the probe and wiring connection is inside the IP 65 housing on a terminal block, the housing is supplied with a plastic cable entry gland.

Download datasheets

Immersion Temperature Sensors TISB and TISS.pdf

Feel free to contact us if you're intressted in the product or have any questions.

Or write us an e-mail in the contact form below straight away.










(Leave empty)