Outdoor Temperature Transmitters TOTP

Outdoor Temperature Transmitters TOTP

Outdoor temperature transmitter TOTP is used for sensing temperature outside and indoors where IP65 is required.

The outdoor temperature transmitter TOTP is used in heating, ventilation and air conditioning systems as reference sensor for wheather-compensated control, measuring sensor, e.g. for optimization, or for measured value display, or for connection to a building management system

The TOTP are active outdoor temperature transmitters with 0-10 Vdc or 4-20 mA output.

8 different temperature ranges in same unit,
selectable via jumpers on pcb:

-20C to +150C, -50C to +50C, -20 to +80C, -30C to +60C,
0 to +40C, 0 to +50C, 0 to +100C and 0 to +150C.

With or without LCD display

The IP 65 plastic housing for outdoor temperature transmitter TOTP is supplied with a plastic cable entry gland, connection terminal is under the cover.

The sensing element of outdoor temperature transmitter TOTP is placed in a probe outside the housing (external).

Always install the outdoor temperature transmitter TOTP on north facing wall and at least 2.5 metres above ground.

Avoid to expose the outdoor temperature transmitter TOTP for direct sunlight, if mounting the unit in sunlight it is recommended to use the sensor shield TSSS.

Do not mount the outdoor temperature transmitter TOTP close to heat sources such windows, doors etc.

The cable entry should be pointing downwards.

  • IP 65 house protection
  • Active transmitter TOTP-series
    with "external" element (inside probe)


Download datasheets

Outdoor Temperature Transmitters TOTP.pdf


Feel free to contact us if you're intressted in the product or have any questions.

Or write us an e-mail in the contact form below straight away.










(Leave empty)