Condensation Sensor
The Condensation Prevention Detector WCD 2 discover the risk of "indoor rain" from chilled ceilings and beams.
The Condensation Prevention Detector WCD 2 is a condensation monitor, which monitors and detects the risk of condensation.
Early condensation warnings solving moisture problem and prevent possible presence of "indoor rain".
The Condensation Prevention Detector WCD 2 have a microprocessor based on moisture and temperature system the dew point is calculated in real time.
When the dew point is getting close the Condensation Prevention Detector WCD 2 rapidly emits a flashing light and the relay output switches to turn off or reduce the cooling water supply to the chilled ceiling / beam when:
- if the piping is very cold
- the dew point is reached
- if the air is hot enough when the detector is in operation
The energy efficiency will be better if the cooling temperature is as near the dew point as possible.
The Condensation Prevention Detector WCD 2 has either a dry contact or current output and is mounted in a small enclosure that can be mounted on the cooled surface that needs to be measured.
The Condensation Prevention Detector WCD 2
- can easily be fixed with the straps onto the coldest place of the chilled ceiling.
- is supplied with two mountable straps.
- can also be screwed onto the cold water supply of the chilled ceiling.
The Condensation Prevention Detector WCD 2 is an easy solution for the prevention of condensation damages to chilled ceilings and beams.
Download datasheet
Condensation Prevention Detector WCD 2.pdf
Feel free to contact us if you're intressted in the product or have any questions.
Or write us an e-mail in the contact form below straight away.
